If your Samsung Android tablet or phone won’t switch on Follow these tried and tested tips to restore your device to motion.
The worst nightmare for anyone with a smartphone is trying to start their phone only to discover that nothing occurs. The phone doesn’t come on. A black screen that shows no indication of life is a recipe for disaster.
What are the causes that your Android phone or Samsung tablet may not be able to turn on? Let’s take a take a look at the causes and solutions.
1. Charging Issues
In most cases that the cause with the greatest obviousness is often the right one.
If you’ve never observed any signs of your phone’s malfunctioning before The issue could be simply a lack of battery juice. The majority of times this is related to issues with charging.
Check Your Connections
The first step is to check the obvious factors. Did you actually make sure to power-up your mobile? Is the charger partially removed off the socket on your wall? Also, is the power outlet activated?
Dirt and Dust
Also, check for dirt, dust or other gunk that is clogging up or the USB port on the charging cable or on the charging port on your phone. Be aware that the ports are fragile. The most efficient method of removing the dirt from ports is using an air compressor.
Troubleshoot Your Cable
USB cable charging is known for crashing at any moment. You can test the quality of your cable by connecting it with a different device and observing whether it is working. We’ve listed several of the top charging cables available for Android should you want to look at different alternatives.
If your phone isn’t turning on after charging, check this article.
2. Perform a Power Cycle
Everyone has experienced the experience of a phone that freezes. The phone’s screen is not responsive and no buttons function. Did you know that it is also possible for phones to stop working in its power-off state?
If you’re Android phone doesn’t work it is possible to power cycle it. If you have an old device with batteries that are removable it’s as simple as taking the battery after a couple of secondsbefore putting it into the device.
For more modern phones which don’t come with a removable battery, hold and press the power button on the device for a few minutes. Depending on the manufacturer you may need to hold the button down for anywhere from 10 to 30 minutes.
3. Check Your Battery
If your phone has died and doesn’t power up or charge, yet you’re confident that the charging device is functioning and you haven’t seen a power cycle that has solved your issues, it’s time to pay focus on the battery in your phone. It could be the cause that your phone’s battery isn’t turning on.
The majority of cell phones and tablets will begin to decline rapidly in performance after a couple of years of usage. In time, they’ll cease to function. Other kinds of damage could be irreparably damaging to the battery. The impact of liquids, falling onto hard surfaces, or extreme temperatures can make a battery ineffective.
Check the Battery Is Receiving Power
Once you have plugged in your tablet or phone into your charger, you should wait for about a minute before determining how the symbol for the battery pops-up at the top of your screen.
If it is, then your battery is in good condition and you are able to proceed to the next step. You could also notice a tiny red (or other colour) blinking light. If this happens this, it indicates that your battery does not have enough power to power up or display any information displayed on your screen. Charge it for 30 minutes, and then attempt again.
Do you not notice a battery icon or an indicator light? It could be that the battery in your device is dying and requires replacement.
If your phone is equipped with batteries that are removable You can purchase the new battery on Amazon for a fair cost. If you have phones that do not have removable batteries, you’ll must attempt to pull off your phone and swap the battery on your own or bring it to a specialist store.
Be aware that if try to replace the battery by yourself you could invalidate the warranty of your device. If you’re looking to assess the condition the battery of the battery on your Android battery Follow our step-by-step guide.
4. Check the Screen
It’s possible that you’re frustrated because your device won’t power on, but in reality it’s turned off without even realizing it. A broken screen may make it appear as if it’s not powered up.
It’s not difficult to determine if your screen is causing the problem. Press the power button on for about 30 seconds in order to confirm that your phone is indeed powered up, and then hold it for at minimum two minutes for the process of booting to be completed.
You can now make a call from a different phone. If your phone rings then your screen is the be blamed. If you’ve enabled a PIN in the SIM card (or eSIM), you will not be able know whether the phone is active by calling you, because the number won’t be in.
In this scenario it is recommended to connect to a Wi-Fi network that has been saved. Your phone will automatically connect to the network and you should listen to the sounds of notifications if Do Not Disturb isn’t turned on. If your phone doesn’t respond, you must continue to.
Keep in mind that you may change the screen yourself however, this time you’ll be voiding your warranty.
5. Use Your Computer to Troubleshoot
If you’re still having trouble getting your device to start then you may be able to make it turn on by using your computer. Google has a rather complicated set of steps you can follow. Below, we’ve simplified them:
- Connect your smartphone to your computer via an USB cable.
- Let it run up to 15 minutes.
- Connect the cable to the device (not connecting it to your laptop).
- Connect your cable in 10 second after disconnecting it.
- The device can be charged for another 30 minutes.
- Click and hold down your button Power button down for 5 minutes.
- Press Restart on your screen.
- If you do not notice Restart on the screen, press on the power key for another 30 minutes.
6. Reset Your Android Device
Maybe your device is turning on, but not pass through the initial boot sequence to the home screen. A damaged upgrade or custom ROM might be the blame. If this is the case you could try the process of restart the settings on your Android phone.
Resetting your tablet or phone erases everything it has. Be sure to regularly backup the crucial Android files.
For a reset of your Android phone to Recovery Mode, go through these steps in the following steps:
- Hold and press your power button as well as the Volume Down button for a couple of minutes until you can see the Android logo appear on the screen. (This key combination can differ with certain manufacturers.)
- Utilize using the Keys Volume Down or volume Down keys to navigate to Recovery Mode..
- Hit on the power button.
- Utilize your keys to turn up the volume. buttons to choose „Wipe Data/Factory Data Reset“ and then press to activate the power button.
- In the end, choose then the Yes–Erase all data option and then press the Power button.
The process of reset will take some time to be completed.
Your Android Device Might Be Broken
If none of this has resulted in success, it’s time to accept that you require an upgrade to your phone. Be aware that certain phones are designed specifically to work in harsh or dirty environments. If you are constantly coming across ports that are clogged then one of these devices could be the ideal solution.